Glass bottle spraying process

The spraying production line of glass bottles generally consists of a spray room, a hanging chain and an oven. Glass bottles also have front-end water treatment, and glass bottles need to pay special attention to the sewage discharge problem. As for the quality of glass bottle spraying, it is related to water treatment, surface cleaning of the workpiece, the conductivity of the hook, the amount of gas, the amount of powder spraying, and the level of the operator. It is recommended to choose the following methods for trial: Pre-treatment section
The pre-treatment section of glass bottle spraying includes pre-stripping, main stripping, surface adjustment, etc. If it is in the north, the temperature of the main stripping part cannot be too low and needs to be kept warm. Otherwise, the treatment effect will not be ideal;
Preheating section
After pre-treatment, it will enter the preheating section, which generally takes 8 to 10 minutes. It is best for the glass bottle to have a certain amount of residual heat when it arrives at the powder spraying room to increase the adhesion of the powder;